|  | error 80070490 | | |
| | | Aileth |  |
|  Posted: Wed Jul 02, 2008 3:53 pm Post subject: error 80070490 |  |
| Can Someone help me to fix this error? error 80070490 |
| |
| | | MowGreen [MVP] | |
| | Posted: Wed Jul 02, 2008 6:26 pm Post subject: Re: error 80070490 | |
The Version of Windows is _________ ?
How to make a good newsgroup post
LINK
Read the above and post back, please.
MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============
Aileth wrote:
> Can Someone help me to fix this error? error 80070490 |
| |
| | | Monty Buettner | |
| | Posted: Sun Sep 21, 2008 6:07 pm Post subject: RE: error 80070490 | |
| |  | |
I THINK I FIGURED IT OUT!!! Forgive my enthusiasm, but I have been battling
this Vista Error 80070490 problem for almost two years now. Microsoft has
been no help at all, and HP did not give me the Vista Ultimate disk when I
bought the laptop so updating using the disk was not an option.
Today I manually downloaded Windows Installer 4.5 from the following webpage
and saved it to my desktop; LINK
Once that was downloaded, I installed it on my PC.
I then downloaded the System Update Readiness Tool for Windows Vista from
the following webpage and saved it to my desktop;
LINK
Once that was downloaded I installed it on my PC.
These installations seemed to take a few hours. At times it looked like
things had froze up. I didn’t mess with anything and just let it do it’s
thing. A few hours later they were both installed. I don’t know which one of
these programs done the trick, but I really don’t care at this point. I
opened the Windows Updater, and searched for updates. Things immediately
started happening that I had not seen in almost two years. It first updated
the platform with service pack 1, then all the other updates I have not been
able to get.
Good luck.
"gene7851" wrote:
| Quote: | trying to install security update KB925902. Continuously fails error code
80070490 which is not listed. How do I complete installation or should I
ignore update? |
|
| |
| | | trudy8630 | |
| | Posted: Fri Sep 26, 2008 12:33 pm Post subject: RE: error 80070490 | |
| | | |
Well lucky for you and thanks for the info but didn't do nothing for my
vista....still got the 8070490 error, I'll just have to keep reading, trying
and hopefully there IS a cure somewhere.
"Monty Buettner" wrote:
| Quote: | I THINK I FIGURED IT OUT!!! Forgive my enthusiasm, but I have been battling
this Vista Error 80070490 problem for almost two years now. Microsoft has
been no help at all, and HP did not give me the Vista Ultimate disk when I
bought the laptop so updating using the disk was not an option.
Today I manually downloaded Windows Installer 4.5 from the following webpage
and saved it to my desktop; LINK
Once that was downloaded, I installed it on my PC.
I then downloaded the System Update Readiness Tool for Windows Vista from
the following webpage and saved it to my desktop;
LINK
Once that was downloaded I installed it on my PC.
These installations seemed to take a few hours. At times it looked like
things had froze up. I didn’t mess with anything and just let it do it’s
thing. A few hours later they were both installed. I don’t know which one of
these programs done the trick, but I really don’t care at this point. I
opened the Windows Updater, and searched for updates. Things immediately
started happening that I had not seen in almost two years. It first updated
the platform with service pack 1, then all the other updates I have not been
able to get.
Good luck.
"gene7851" wrote:
trying to install security update KB925902. Continuously fails error code
80070490 which is not listed. How do I complete installation or should I
ignore update? |
|
| |
| | | MowGreen [MVP] | |
| | Posted: Fri Sep 26, 2008 5:42 pm Post subject: Re: error 80070490 | |
| | | |
From: LINK
| Quote: | Support:
• Customers in the U.S. and Canada can receive technical support from Microsoft Product Support
Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security
updates.
• International customers can receive support from their local Microsoft subsidiaries. There is no
charge for support that is associated with security updates. For more information about how to contact
Microsoft for support issues, visit the International Support Web site.
LINK
|
Give MS a call as there is *no-charge* support offered in getting this
security update and ALL security
updates installed.
MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============
trudy8630 wrote:
| Quote: | Well lucky for you and thanks for the info but didn't do nothing for my
vista....still got the 8070490 error, I'll just have to keep reading, trying
and hopefully there IS a cure somewhere.
"Monty Buettner" wrote:
I THINK I FIGURED IT OUT!!! Forgive my enthusiasm, but I have been battling
this Vista Error 80070490 problem for almost two years now. Microsoft has
been no help at all, and HP did not give me the Vista Ultimate disk when I
bought the laptop so updating using the disk was not an option.
Today I manually downloaded Windows Installer 4.5 from the following webpage
and saved it to my desktop; LINK
Once that was downloaded, I installed it on my PC.
I then downloaded the System Update Readiness Tool for Windows Vista from
the following webpage and saved it to my desktop;
LINK
Once that was downloaded I installed it on my PC.
These installations seemed to take a few hours. At times it looked like
things had froze up. I didn’t mess with anything and just let it do it’s
thing. A few hours later they were both installed. I don’t know which one of
these programs done the trick, but I really don’t care at this point. I
opened the Windows Updater, and searched for updates. Things immediately
started happening that I had not seen in almost two years. It first updated
the platform with service pack 1, then all the other updates I have not been
able to get.
Good luck.
"gene7851" wrote:
trying to install security update KB925902. Continuously fails error code
80070490 which is not listed. How do I complete installation or should I
ignore update? |
|
| |
| | | Ken D | |
| | Posted: Sun Sep 28, 2008 6:44 pm Post subject: RE: error 80070490 | |
| | | |
I tried the Windows Installer 4.5. I'm running Vista, but none of the 3
downloads for Vista would work. All tried to update and then gave me an
error that said 'this update doesn't apply to this system"
"Monty Buettner" wrote:
| Quote: | I THINK I FIGURED IT OUT!!! Forgive my enthusiasm, but I have been battling
this Vista Error 80070490 problem for almost two years now. Microsoft has
been no help at all, and HP did not give me the Vista Ultimate disk when I
bought the laptop so updating using the disk was not an option.
Today I manually downloaded Windows Installer 4.5 from the following webpage
and saved it to my desktop; LINK
Once that was downloaded, I installed it on my PC.
I then downloaded the System Update Readiness Tool for Windows Vista from
the following webpage and saved it to my desktop;
LINK
Once that was downloaded I installed it on my PC.
These installations seemed to take a few hours. At times it looked like
things had froze up. I didn’t mess with anything and just let it do it’s
thing. A few hours later they were both installed. I don’t know which one of
these programs done the trick, but I really don’t care at this point. I
opened the Windows Updater, and searched for updates. Things immediately
started happening that I had not seen in almost two years. It first updated
the platform with service pack 1, then all the other updates I have not been
able to get.
Good luck.
"gene7851" wrote:
trying to install security update KB925902. Continuously fails error code
80070490 which is not listed. How do I complete installation or should I
ignore update? |
|
| |
| | | Ken D | |
| | Posted: Sun Sep 28, 2008 7:06 pm Post subject: RE: error 80070490 | |
| | | |
I'm running Vista.
I tried to install Windows Installer 4.5, but each of the Vista downloads
said that this update is not compatible with my system.
I then went to your 2nd link for the Windows Update Readiness Tool. That
says you get it through Windows Update, which of course does not work as I am
under the Error Code 80070490. On the bottom of that page under Information
for advanced User, I went to the link for Windows Vista and downloaded it
(KB947821) and installed it. This took some time but it eventually completed
the installation.
I then ran Windows Update and got the same old error 80070460.
"Monty Buettner" wrote:
| Quote: | I THINK I FIGURED IT OUT!!! Forgive my enthusiasm, but I have been battling
this Vista Error 80070490 problem for almost two years now. Microsoft has
been no help at all, and HP did not give me the Vista Ultimate disk when I
bought the laptop so updating using the disk was not an option.
Today I manually downloaded Windows Installer 4.5 from the following webpage
and saved it to my desktop; LINK
Once that was downloaded, I installed it on my PC.
I then downloaded the System Update Readiness Tool for Windows Vista from
the following webpage and saved it to my desktop;
LINK
Once that was downloaded I installed it on my PC.
These installations seemed to take a few hours. At times it looked like
things had froze up. I didn’t mess with anything and just let it do it’s
thing. A few hours later they were both installed. I don’t know which one of
these programs done the trick, but I really don’t care at this point. I
opened the Windows Updater, and searched for updates. Things immediately
started happening that I had not seen in almost two years. It first updated
the platform with service pack 1, then all the other updates I have not been
able to get.
Good luck.
"gene7851" wrote:
trying to install security update KB925902. Continuously fails error code
80070490 which is not listed. How do I complete installation or should I
ignore update? |
|
| |
| | | Ken D | |
| | Posted: Sun Sep 28, 2008 7:06 pm Post subject: Re: error 80070490 | |
| | | |
I got the Windows Installer Cleanup tool, but once it was running, I could
not find any entry for the .NET Framework.
"IHatethis!@#$" wrote:
| Quote: |
"dadoffourkids" wrote:
We have a Vista computer failing with the same error code. We can't find a
reference either. We contacted Microsoft and got a completely different set
of instructions:
Dear Customer,
Thank you for contacting Microsoft Windows Update Support. My name is Kino
and I am glad to work with you. To contact me, you can send emails directly
to my account: xxxxxxx@mssupport.microsoft.com with the case ID xxxxxxx in
the subject line.
I would like to apologize for the delay in responding to your support
request. Please be assured that you have successfully contacted the correct
support team and I will be working with you to address your concerns as
quickly as possible.
From your description, I understand that the Security Update for Microsoft
.NET Framework, Version 2.0 (KB929916) cannot be installed. If I have
misunderstood your concern, please feel free to let me know.
I understand the inconvenience you have experienced. Please be assured that
I will do my best to help you resolve the issue as quickly as possible.
The issue can be caused by a damaged .NET Framework component. At this time,
let's refer to the following steps to troubleshoot it:
Step 1: Download Microsoft Windows Installer CleanUp utility
============================================
1. Visit:
LINK
2. Please save the file on your Desktop
3. Please double click the msicuu2.exe file to install it onto your computer.
Step 2: Remove .NET Framework 2.0
===========================
1. Click Start Button -> All Programs->Windows Installer Clean Up.
2. Please locate and remove.NET Framework software.
After that, please perform the following suggestions to reinstall .NET
Framework 2.0 and its update.
Step 3: Reinstall .NET Framework Version 2.0 Redistributable Package and its
update
================================================================
Please download and install the following updates one by one using sequence.
Microsoft .NET Framework Version 2.0 Redistributable Package (x86)
LINK
.NET Framework 2.0 SYSTEM.WEB.DLL Security Update for Windows Vista
LINK
Note: When the “File Download” window appears, please click the Save button,
and follow the directions to save the file on the Desktop. After downloading
all setup files, please double-click on each one to install them one by one.
However, if any error message is encountered when installing .NET Framework
2.0 and the update, please capture a screenshot for further research.
|
|
| |
| | | Ken D | |
| | Posted: Sun Sep 28, 2008 7:16 pm Post subject: Re: error 80070490 | |
| | | |
After Cleanup could not find .NET Framework, I went to the next link to
install .NET Framework v2.0 Redisributable Package and after running it, it
said: .NET is already installed as part of your operating system.
I then went to the next link for the .NET Framework 2.o Security Update for
Vista and running that told me that it was not compatible with my system.
"IHatethis!@#$" wrote:
| Quote: |
"dadoffourkids" wrote:
We have a Vista computer failing with the same error code. We can't find a
reference either. We contacted Microsoft and got a completely different set
of instructions:
Dear Customer,
Thank you for contacting Microsoft Windows Update Support. My name is Kino
and I am glad to work with you. To contact me, you can send emails directly
to my account: xxxxxxx@mssupport.microsoft.com with the case ID xxxxxxx in
the subject line.
I would like to apologize for the delay in responding to your support
request. Please be assured that you have successfully contacted the correct
support team and I will be working with you to address your concerns as
quickly as possible.
From your description, I understand that the Security Update for Microsoft
.NET Framework, Version 2.0 (KB929916) cannot be installed. If I have
misunderstood your concern, please feel free to let me know.
I understand the inconvenience you have experienced. Please be assured that
I will do my best to help you resolve the issue as quickly as possible.
The issue can be caused by a damaged .NET Framework component. At this time,
let's refer to the following steps to troubleshoot it:
Step 1: Download Microsoft Windows Installer CleanUp utility
============================================
1. Visit:
LINK
2. Please save the file on your Desktop
3. Please double click the msicuu2.exe file to install it onto your computer.
Step 2: Remove .NET Framework 2.0
===========================
1. Click Start Button -> All Programs->Windows Installer Clean Up.
2. Please locate and remove.NET Framework software.
After that, please perform the following suggestions to reinstall .NET
Framework 2.0 and its update.
Step 3: Reinstall .NET Framework Version 2.0 Redistributable Package and its
update
================================================================
Please download and install the following updates one by one using sequence.
Microsoft .NET Framework Version 2.0 Redistributable Package (x86)
LINK
.NET Framework 2.0 SYSTEM.WEB.DLL Security Update for Windows Vista
LINK
Note: When the “File Download” window appears, please click the Save button,
and follow the directions to save the file on the Desktop. After downloading
all setup files, please double-click on each one to install them one by one.
However, if any error message is encountered when installing .NET Framework
2.0 and the update, please capture a screenshot for further research.
|
|
| |
| | | Ken D | |
| | Posted: Sun Sep 28, 2008 7:18 pm Post subject: Re: error 80070490 | |
Yes. I have the same error and have tried each fix in this thread but they
have not worked for me.
"Bobby Locksville" wrote:
| Quote: | anyone else havint this problem with WINDOWS VISTA UPDATE issues,
I cant seem to get the system to update at all
and al lI get is this error
80070490
HELP
"dadoffourkids" wrote:
Our problem was solved by removing and re-installing .NET 2.0 manually.
Windows Update is now working correctly on the Vista machine.
"JTPortugal" wrote:
Hi. i have the same problem and its pissing me off.
i tried to solve it by doing what you just mentioned, but i can't seem to
find Windows Installer Clean Up after i install it, so i cannot use it... any
ideas why? it just doesn't seem to be installed in the computer. weird... and
i cannot follow the rest of the instructions 'cause i can't remove ,Net...
|
|
| |
| Page 1 of 2 .:. Goto page 1, 2 Next | |
|
|
